IPExpert V2 Lab8

Task 3.2 RIP Triggered update

Can only be used on point-to-point interface and need to be configured on both sides.

Task 3.2 Redistribution

It seems that using the command distance distance neigbhor with eigrp only affect internal route.
Whereas in ospf it affect all routes


Task 3.2 MPLS Tag of default-route

The command mpls ip default-route permit to tag a default-route if neighbor has advertised one in it's routing table and advertized a label for it.



Task 6.2 Bidir

Task was to use exclusively shared tree
My solution was to put an spt-threshold of infinity but in this case the source to SPT is a source-tree.
Exclusively shared is the fac of bidir.

Just add :
On all routers
ip ipm bidir-enable
On R8
ip pim rp-candidate lo1 bidir

Task 7.4 NTP

When filtering who ntp server can server don't forget 127.127.7.1 which is used by master to sync with himself

Task 9.2 Finding TCP/UDP port

A good command to know is : sh ip nbar port-map

Task 9.3 FRTS

Access-rate or burst-rate is Be+Bc every Tc.
Ex CIR =64k and Access-rate=96k for 20ms
Bc=1280 be=640
I've done wrong calculating be independantly of bc (setting be to 1920 so an access-rate to 160kb)