IPExpert V2 Lab10

2.1 Spanning-tree etherchannel guard

Spanning-tree etherchannel is automatically activated to erredisable ports when ehterchannel misconfiguration is detected. To only display a message but no errdisable :

no spanning-tree ethernchannel guard misconfig

2.4 Telnet to switch

Forgot default-gateway !

2.6 Frame-relay multilink

Quite simple :

int mfr XX

int s0/0
encap frame-relay mfr XX

Some timers could be set with frame-relay multilink command under the physical interface
Hello : 10s
Ack :4s
Retry :2

5.0 EIGRP

The purpose was to make a route muche more better by a router by setting a high delay on interface and on redistribution on one of the router.

Reported distance was so high that impossible to load-balance with variance.

Solution 1 : change the delay on the other router (with delay X on interface and during redistribution)
Solution 2 : don't take into account the delay parameter (metric weigh 010000)

13.1 QOS

Configured a priority queue but the words 'configure a strict queue unless there is more than 1Mbps' is more an LLQ

13.2 General traffic shaping

Must be configured directly on physical interface with
traffic-shape rate ...
traffic-shape fecn-adapt

GTS apply for all VC on the physical interface whereas FRTS
I used FTRS (frame-relay class command)