IPExpert V2 Lab1

Review :

1.0 Etherchannel load balancing
Load balance according to where frame are headed : means where frame goes so it's destination mac load-balancing type.

1.4 PPPoE
PPPoE is on aggregation & DSL on the doc CD.
Virtual-template and bba-group on the server side
Dialer with ppp encap on the client side

2.1 Frame-Relay
Don't forget local frame-relay map on physical or multipoint interface to ping ourselves
Broadcast keyword is no necessary for spoke on frame-relay map

3.1 RIP
When more passive than active it's easier to do :
passive-interface default
no passive-interface f0/0

To add dely between rip update

router rip
output-delay 25

7.3 Snmp Trap configuration
Event after snmp-host x.x.x.x configuration don't forget to enable trap
snmp-server enable traps

10.1 DHCP Server Secure ARP
In order arp table secured by dhcp entry

update arp


11.3 RSVP

Activate RSVP on interface
ip rsvp bandwidth

ip rsvp sender-host and ip rsvp reservation-host are used to simulate a PATH message between 2 router and verify that reservation is done on the path.


12.3 EEM
event maanger applet denytcl
event cli pattern "tclsh" sync yes
action syslog msg "Attempted tclsh command by user at $_$event_pub_time"
set _exit_status 0